Eleanor Finch
In Pasco County, Florida, there are several local ordinances and codes that govern what constitutes a legal fence. These regulations cover aspects such as height restrictions, permitted materials, and the necessity of obtaining building permits. The county's guidelines differentiate between residential and non-residential properties, with specific provisions for waterfront properties. Understanding and adhering to these standards are crucial for property owners who plan to install or modify fencing on their premises.
| Characteristics | Values |
|---|---|
| Height | Fences, walls, and hedges between a structure and a street or alley shall be measured from the street curb or alley grade. |
| The height of fences, walls, and hedges between a structure and a common lot line shall be measured from the grade along the common lot line or the top of any retaining wall. | |
| The height limit is three and one-half feet. | |
| An additional one and one-half feet, made of 85% transparent material, is permitted for a maximum of five feet within the front yard area of residential, retail business, and office-zoned lots. | |
| Fences higher than three feet above curb grade are not permitted within 20 feet of the property lines from the intersection of two streets or 15 feet from the intersection of a street and an alley. | |
| An alternative fence material such as masonry, wrought iron, wood, or a combination may be used, but the fence must be 75% transparent and may be a maximum of six feet in height. | |
| Materials | Fences shall not be constructed out of tires, pallets, bed springs, multicolored materials, tarps, plastic sheets, corrugated sheet metal (except in industrial districts), wheel rims, or similar materials not traditionally used for fencing. |
| Hog wire, chicken wire, horseman wire mesh, v-mesh, field fence, woven field fence, welded utility fence, or any similar wire fencing material is not permitted in residential or commercial zones. | |
| Horseman wire mesh and the other wire fencing listed above may be permitted in suburban residential districts on tracts larger than one acre used for animal husbandry. | |
| Fences in commercial districts shall complement the materials used in any principal on-site structures. | |
| There are specific material restrictions for waterfront properties. | |
| Barbed wire fencing is prohibited in all residential districts, the office district, and the central business district. | |
| Barbed wire may be permitted in suburban residential districts on tracts larger than one acre used for animal husbandry. | |
| In the C-1 retail business district, only one strand of barbed wire is permitted along the top rail or within two inches of it. | |
| Electrified fences are not permitted in residential districts except as a secondary means of securing property, where the fence is located behind an existing fence or in suburban districts to contain permitted farm animals. | |
| In all front yards, rails, posts, and other structural fence supports shall not be visible from a public street, except for those that are an integral part of the fence design and aesthetics. |
Explore related products
What You'll Learn
Permits and exemptions
Permits are generally required for building activities in Pasco County, Florida, including the erection, construction, alteration, or repair of a building or structure. However, there are specific exemptions outlined by the county. Here are the details pertaining to permits and exemptions specifically related to fences:
Permits
Permits are required for fence construction in Pasco County. The specific requirements and restrictions vary based on the zoning of the property, such as residential, commercial, or waterfront. It is important to consult the Pasco County Municipal Code for detailed information on the regulations applicable to your specific zone.
Exemptions
Pasco County has outlined several exemptions from permit requirements for fences:
- Material Restrictions: Fences in residential properties are restricted to specific materials, including corrugated metal, sheet aluminum, barbed wire, or similar options. Non-residential properties do not have material restrictions.
- Height Regulations: Fences, walls, and hedges in front yards are limited to a height of three and a half feet. An additional one and a half feet of 85% transparent material is permitted for a maximum height of five feet.
- Sight Distance Triangles: All fences must conform to the Pasco Design and Construction Standards related to sight distance triangles.
- Prohibited Materials: Tires, pallets, bed springs, multicolored materials, tarps, plastic sheets, corrugated sheet metal, and similar materials are prohibited in residential and commercial zones. Hog wire, chicken wire, horseman wire mesh, and other similar wire fencing materials are also prohibited in these zones. However, they may be permitted in suburban residential districts for animal husbandry.
- Barbed and Razor Wire Fencing: This type of fencing is prohibited in residential districts, the office district, and the central business district. It may be permitted in suburban residential districts for animal husbandry or in the C-1 retail business district with specific restrictions.
- Electrified Fences: Electrified fences are not permitted in residential districts, except as a secondary means of securing property when placed behind an existing fence or in suburban districts for containing permitted farm animals.
- Structural Supports: In all front yards, rails, posts, and other structural fence supports should not be visible from a public street, unless they are an integral part of the fence design and aesthetics.
- Intersection Regulations: Within 20 feet of the intersection of two streets or 15 feet from the intersection of a street and an alley, there are specific height and transparency requirements for fences, walls, or hedges. Alternative materials like masonry, wrought iron, or wood may be used with specific height and transparency conditions.
- Sidewalk Placement: Fences may be permitted at the back of sidewalks in public right-of-way upon approval from the City Engineer, with certain exceptions outlined in the code.
- Pre-existing Fences: Fences built with valid permits before the effective date of the relevant code chapter or annexed to the City after this date are exempt from certain regulations.
It is important to refer to the Pasco County Municipal Code and the Florida Building Code for comprehensive information on permits and exemptions, as well as any recent updates or amendments to the regulations.
Understanding the Components of a 5-Ton AC System
You may want to see also
Height regulations
The height of fences, walls, and hedges in Pasco County, Florida, is regulated by the Pasco Municipal Code. The code stipulates that the height measurement of fences, walls, and hedges located between a structure and a street or alley should be taken from the street curb or alley grade. However, in cases where topographical irregularities are present, the height measurement should be adjusted accordingly.
Additionally, the code specifies that the height of these structures between a structure and a common lot line should be measured from the grade along the common lot line or the top of any structural retaining wall at the common lot line. The maximum height allowed for fences, walls, and hedges in Pasco County is limited to three and a half feet. However, an additional one and a half feet, made up of 85% transparent material, is permitted, bringing the maximum height to five feet within the front yard area of residentially zoned lots, retail businesses, and office-zoned lots.
It's important to note that fences taller than three and a half feet in front yards must display address numbers that comply with the International Building Code. Furthermore, within 20 feet of the property lines at the intersection of two streets, or within 15 feet of the intersection of a street and an alley, there are additional height restrictions. In these areas, no fence, wall, hedge, landscape material, or foliage should exceed three feet in height above the curb grade. However, if alternative fence materials are used, such as masonry, wrought iron, wood, or a combination thereof, the height restriction increases. In this case, the fence must be 75% transparent and can be a maximum of six feet in height. Alternatively, a smaller, 75% transparent fence can be erected on top of a three-foot wall or other structure, as long as the combined height does not exceed six feet. This structure should always remain unobstructed by foliage or other materials.
Barbed and razor wire fencing is prohibited in residential districts, the office district, and the central business district. However, there are exceptions for certain cases. For instance, barbed wire may be permitted in suburban residential districts on tracts larger than one acre that are used for animal husbandry. Additionally, in the C-1 retail business district, only one strand of barbed wire is allowed along the top rail or within two inches of it. Electrified fences are generally not permitted in residential districts, except as a secondary means of securing property where the electrified fence is placed behind an existing fence or in suburban districts for containing permitted farm animals.
The Founding Fathers: A Small Group, Big Impact
You may want to see also
Materials permitted
In Pasco County, Florida, there are specific regulations and permitted materials that must be adhered to when constructing a fence. These regulations vary for residential, commercial, and non-residential properties. Waterfront properties also have additional requirements.
For residential properties, only certain materials are allowed for fence construction. These include corrugated metal, sheet aluminium, and barbed wire. Similar materials are also generally permitted. However, there are specific types of fencing that are prohibited. For instance, hog wire, chicken wire, horseman wire mesh, v-mesh, field fence, and welded utility fence are not permitted in residential zones. Fences in residential districts also cannot feature razor wire fencing or electrified fences, except as a secondary means of securing property where the electrified fence is behind an existing fence.
In commercial districts, the materials used for fences must complement those used in any principal on-site structures. Fences in commercial zones are also subject to height restrictions, with a maximum height of three and a half feet. An additional one and a half feet of 85% transparent material is permitted, allowing for a maximum height of five feet within the front yard area.
Non-residential properties do not have any material restrictions. However, regardless of the property type, certain materials are prohibited. For example, fences in Pasco County cannot be constructed out of tires, pallets, bed springs, multi-coloured materials, tarps, plastic sheets, or corrugated sheet metal, except in industrial districts.
Furthermore, specific regulations apply to the height and location of fences. Fences located within 20 feet of an intersection of two streets or within 15 feet of a street and alley intersection must adhere to specific height and transparency requirements. In these areas, a fence made of alternative materials, such as masonry, wrought iron, wood, or a combination thereof, can be up to six feet tall if it is 75% transparent. Alternatively, a smaller, 75% transparent fence can be set upon a three-foot wall or other structure, not exceeding a combined height of six feet, as long as the fence remains unobstructed by foliage or other materials.
Hamilton's Influence: Shaping the US Constitution
You may want to see also
Explore related products
Prohibited materials
When constructing a fence in Pasco County, Florida, it is important to adhere to the prohibited materials outlined in the Pasco Municipal Code. The regulations specify the materials that are not permitted for fence construction in the county.
For residential properties, the choice of fencing materials is restricted to a specific set of options. Prohibited materials for residential fences include corrugated metal, sheet aluminium, barbed wire, or similar materials. On the other hand, non-residential properties do not have any material restrictions, allowing for greater flexibility in fence construction.
Regardless of the property type, certain materials are universally prohibited in Pasco County. Tires, pallets, bed springs, multicoloured materials, tarps, plastic sheets, and corrugated sheet metal are not permitted as fencing materials, except in industrial districts. Additionally, wire fencing materials like hog wire, chicken wire, horseman wire mesh, V-mesh, field fence, and welded utility fence are forbidden in residential and commercial zones. These wire fencing types may, however, be allowed in suburban residential districts dedicated to animal husbandry, provided the land tract exceeds one acre.
Barbed and razor wire fencing is also prohibited across residential districts, the office district, and the central business district. An exception is made for suburban residential districts focused on animal husbandry, where barbed wire may be permitted on land tracts larger than one acre. In the C-1 retail business district, a single strand of barbed wire is allowed along the top rail or within two inches of it.
Electrified fences are generally not permitted in residential districts. However, they can be used as a secondary means of securing property if placed behind an existing fence or in suburban districts for containing permitted farm animals.
US Constitution: World's Best?
You may want to see also
Maintenance requirements
The height of fences, walls, and hedges in Pasco County is regulated and must be measured from the street curb or alley grade, or from the grade along the common lot line in the case of structures with a common lot line. The maximum height allowed is three and a half feet, with an additional one and a half feet of 85% transparent material permitted for a total height of five feet in front yard areas. In certain cases, alternative fence materials such as masonry, wrought iron, or wood may be used, with a maximum height of six feet, provided the fence is 75% transparent.
Fences must also complement the materials used in any principal on-site structures in commercial districts. Prohibited materials for fence construction in residential and commercial zones include tires, pallets, bed springs, multicolored materials, tarps, plastic sheets, corrugated sheet metal, and similar items not traditionally used for fencing. Hog wire, chicken wire, horseman wire mesh, and other similar wire fencing materials are also not permitted in these zones. However, wire fencing may be allowed in suburban residential districts for animal husbandry.
Barbed and razor wire fencing is prohibited in residential districts, the office district, and the central business district. However, barbed wire may be permitted in certain cases for animal husbandry in suburban residential districts. Electrified fences are generally not permitted in residential districts, except as a secondary means of securing property or in suburban districts for containing permitted farm animals.
In front yards, structural fence supports such as rails and posts should not be visible from a public street, unless they are an integral part of the fence design and aesthetics. Additionally, fences located within 20 feet of the intersection of two streets or within 15 feet of a street and alley intersection must adhere to specific height and transparency requirements.
Permits are generally not required for fences without concrete footers, although certain types of construction, alteration, or repair work may require a building permit. It is important for property owners to maintain their fences and keep them in good condition to comply with local ordinances.
Constitution of 1917: Empowering Farmers with Rights and Representation
You may want to see also
Frequently asked questions
For residential properties, permitted materials include corrugated metal, sheet aluminium, barbed wire, or similar materials. Non-residential properties have no material restrictions. However, specific materials are prohibited, including tires, pallets, bed springs, multi-coloured materials, tarps, plastic sheets, and corrugated sheet metal.
The height of fences, walls, and hedges shall be limited to three and a half feet. An additional one and a half feet comprised of 85% transparent material is permitted for a maximum of five feet within the front yard area of residentially zoned lots. In areas 20 feet along the property lines from the intersection of two streets, or 15 feet from the intersection of a street and an alley, no fence can be higher than three feet unless it is made of alternative materials, in which case it must be 75% transparent and may be a maximum of six feet in height.
Permits are not required for fences without concrete footers. However, permits are generally required for construction activities, and engaging in construction without a permit is a violation of the Pasco County code. Therefore, it is advisable to check with the county or a local professional to determine if a permit is necessary for your specific project.
